Basic Info.
After-sales Service
2 Years
Door Thickness Fits
35-50mm
Lock Cylinder Length
75mm
Usage
Household Door Locks
Transport Package
Standard Exporting Packaging
Origin
Ningbo Zhejiang, China
Product Description
Main Characteristics of Single Door Magnetic Lock:
▪The product use with access controller, to be installed on glass doors, wooden doors, iron gate and fireproof doors.
▪Operating current: 12V
▪Tension bearing: 560KGS
▪Output voltage: DC12V
▪Dimension: 250(L)*42(W)*25(H)mm
▪Low noise, resistance to weather, easy-installation, places with surge receiver, actuation on electricity.
Product images of Door Magnetic Lock
Magnetic Lock Wiring Instructions
A. 12V DC Input
Required power 0.38Amp( Minimum ).
Connect the positive (+) lead from a 12V DC power source to blue wire.
Connect the ground (-) lead from a 12V DC power source to white wire.
Check jumper for 12V DC operation.
B.24V DC Input
Require power 0.19 Amp( minimum ).
Connect the positive (+) lead from a 24V DC power source to blue wire.
Connect the ground (+) lead from a 24V DC power source to white wire.
Check jumper for 24V DC operation.
Important: Please Read Before Attempting to Install Magnetic Lock
A.Handle the equipment with care, damaging the mating surfaces of the magnet or armature plate may reduce locking efficiency.
B.The magnet mounts rigidly to the door frame, the armature plate mounts to the door with hardware. Kit provided that allows it to pivot about its center to compensate for door wear and misalignment.
C.Template use must take place with door in its normally closed position.
D.Before installing, please add thread locked to all screws. Firmly tighten screws to avoid fastening loosen.
Typical Installation
** Important: Fix the armature plate not too tightly, and make the rubber washer more flexible, in order to make the armature plate autonatically adjust its proper position with the magnet.
Mounting Instructions
Step1
•Fold template along dotted line.
•Place template against door and head frame.
•Drill holes as indicated on template.
Step2
•Mount the armature plate to door using 1 rubber washer sandwiched between 2 steel washer( the rubber •washer and 2 steel washer are installed on the through sexnut between the armature plate and door ).
Step3
•Install the mounting plate
•Adjust the mounting plate so that it and the armatute plate form right angle.
▪Using the mounting plate as a template, drill the wire hole.
•Drill land install the remaining mounting screws.
Step4
•Install magnet to mounting plate with 2 M4(M6) screws supplied.
Step5
•Install electrical wiring per instruction sheet.
Step6
•Test all functions of this model( see wiring instruction )
Other Accessories & Optional PartsOptional accessories:| Details of Optional accessories |
| Model No. | Specification |
| MS01 | Microwave sensor(10GHZ/24GHZ)
Power: AC/DC 12~36V
Radio frequency:10.525GHZ/24.125GHZ
Protection level: IP54
Size:131×61×46mm(L×W×H)
Max installation height: 4M
Detection range and sensibility can be adjusted. |
| MS02 | Microwave sensor(10GHZ/24GHZ)
Power: AC/DC 12~36V
Radio frequency: 10.525GHZ/24.125GHZ
Protection level: IP54
Size:110×64×42mm(L×W×H)
Max installation height: 4M
Detection range and sensibility can be adjusted. |
| MS03 | Microwave Sensor(24GHZ) with German Innosent Chip
Power: AC/DC 12~36V
Radio frequency: 24.125GHZ
Protection level: IP54
Size:121×80×51mm(L×W×H)
Max installation height: 4M
Detection range and sensibility can be adjusted. |
| IS01 | Infrared sensor
Power: AC/DC 12~36V
Sensing distance:0.2m-2m
Protection level: IP54
Size:221×74×35mm(L×W×H)
Max installation height: 3meters
Detection range and sensibility can be adjusted.
The product can be used in the occasion where the building environment is narrow and close to street and the accuracy detection ability is demanded .Detection sensing distance adjustable, with high anti-interference , easy operation and reliable |
| IS02 | Combined microwave&infrared sensor
Power:AC/DC 12~36V
Transmitting frequency:24.125GHZ
Protection level:IP54
Size:262×55×44mm(L×W×H)
Max installation height: 3meters
Combined radar activation and Infrared safety sensor is used for automatic sliding door, folding door and curve door. Radar technology is for door activation. Infrared technology is for door safety entrance. Unique anti-clip function design, no need extra safety beam sensors.
Have function of background self-learn. Can learn background automatically when power on. Suit all kinds of occasions.Always self-correcting once be influenced by quake, distortion, move, dark and sunshine. Ensure the sensor can work durable.
Microwave technology adopts the Germany Microwave sensor module, not influenced by temperature and humidity with reliable working performance. |
| PT01 | Safety beam(photocell)
Power:AC/DC12~36V
Max transmission distance: 10m
Type: single beam(one pair eyes)/ double beam(2 pairs eyes)
Receiver dimension:123*50*32mm
Electric eyes:19(length)*13(diameter)mm |
| FS01 | Foot sensor switch
Power:AC/DC12~36V
Recommended installation height: 0.3 meters from the ground
Active infrared ray of modulation-demodulation controlled by microcomputer. Widely used in the operating room of hospital and laboratory to prevent hand pollution. |
| FC01 | Five-range programmed function switch
Power: 12~36V
Function status: full open, half open, exit only, lock, automatic
Size:113×63×20mm(L×W×H)
function switch against passwords, safe and reliable. With memory function in case of power failure. Password can be reset.. |
| FC02 | Five-range function keypad
Power: 12~36V
Functions: full open, half open, exit only, lock, automatic
Size:86×86×10mm(L×W×H) |
| KP01 | Function key switch(five-range)
Power: AC/DC 18~36V
Functions: full open, half open, exit only, lock, automatic
Size:86×86×10mm(L×W×H) |
| KP02 | LED key switch(five-range)
Power: AC/DC18~36V
Size:92×92×46mm(L×W×H)
Functions: full open, half open, exit only, lock, automatic
This product is unidirectional command switch for automatic door accessory using. With special design with bottom panel, it is convenient for different installation occasions. |
| KP03 | Five-range LCD key switch
Power: AC/DC12~36V
Size:92×92×33 mm(L×W×H)
Functions: full open, half open, exit only, lock, automatic
This product is unidirectional command switch for automatic door. With TFT true color liquid display, special design with bottom panel, it is convenient for different installation occasions. |
| PB07 | Infrared hand sensor switch
Power: AC/DC12~36V
Size:92×92×33 mm(L×W×H)
Transmit distance: 1-20cm, can be set according to actual occasion. |
| FC04 | Learning code remote control device(4 channels)
Power: 24VDC
433 MHZ Learning code type
Transmission distance: 25M
Function status: full open, half open,lock, automatic |
| FC05 | Learning code remoter control device(4 channels)
Power: 24VDC
433 MHZ Learning code type
Transmission distance: 25M
Function status: full open, half open,lock, automatic |
| FP01 | Fingerprint access control device / time attendance machine
Power supply:12VDC
Fingerprint capacity:1000
Recorded capacity:100,000
Dimension:180*82*53(L×W×H)
Identification mode: Fingerprint / ID card / Password
Voice prompt: available |
| PB04 | No touch hand sensor switch
Power: DC 12V
Working type: infrared induction
Working distance: 5-15cm, can be set according to actual occasion.
Weight: 110g
Size: 86×86×35mm(L×W×H) |
| PB05 | Infrared touchless hand sensor switch
Power: AC/DC12~36V
Working type: infrared induction
Transmit distance: 1-15cm, can be set according to actual occasion.
Size:113×63×20mm(L×W×H)
Weight: 110g |
| PB06 | Wireless push button switch
Power: AC/DC12~36V
Hold open time:1-9S adjustable
Pushing panel:203(L)*41(W)*12.5(H)mm
Receiver:123(L)*50(W)*32(H)mm
Widely be used for auto door and door control equipment. With the wireless signal output,door can be open by the pushing the panel. Easy installation,specially designed for the occasions which have difficulty in wire embedding. |
| AK02 | Access keypad(plastic)
Power: 12VDC
User capacity: 500 users
Open method:Card, password, both.
1000 pcs card info can be stored
Dimension:117×117×21(mm)
Specific designed for office, housing, security system and building's access . It not only can work by reading card or password ,but also can control electric lock and auto-door. |
| AK03 | Access keypad
Power: 12VDC
Storage capacity: 1000 users
Open method:Card, password, card+password.
Dimension:115×75×21(mm) |
| AK04 | Access keypad
Power: 12VDC
Storage capacity: 1000 users
Open method:Card, password, card+password.
Dimension:110×75×25(mm) |
| FP02 | Finger printer(stainless)
Power: DC 12V
Memory capacity:120
Weight: 500g
Size: 115×70×35mm(L×W×H) |
| UPS | Automatic door backup lithium battery
Input voltage:220VAC, 50HZ
Output voltage:DC12V/5.2A, DC24V/2.6A
Size: 243×59×45mm(L×W×H)
When power off, it can make the door work 7 hours
or open and close 500 times. |
| PB03 | Wired push button switch(plastic)
Weight: 96g
Size: 200×50×12.5mm(L×W×H) |
| PB02 | Wired push button switch(stainless) with blue LED
Weight: 65g
Size: 84×84×35mm(L×W×H) |
| PB01 | Wired push button switch(stainless) with blue LED
Weight:50g
Size: 84×84×27mm(L×W×H) |
| LC01 | Metal manual lock
Lock manually, open with key. |
| LC02 | Electric lock
Power: DC 12V
Working current: 45mA
Installation hole:200(L)×41(W) ×34(H) mm
Panel dimension:205×34×3 mm(L×W×H) |
| LC03 | Electromagnetic lock
Power: DC 12V
Working current: 180mA
With the function of locking the access device, it uses with access control,and equip with bracket for installation. |
| LC04 | Electromagnetic lock
Power: DC 12V
Working current: 960mA
Load weight:180kgs
The product uses with access control device , it can be installed on glass doors ,wooden doors, iron gate or fireproof doors.
|
| DS01 | Auto door disable switch
Power:AC/DC12~36V
Panel size:160(L)*120(W)*15(H)mm
Stainless steel panel design,easy operation with key to choose different functions including: Emergency opening, Automatic and Full lock. Suitable for automatic door of disable-person washroom or washroom management of building. |
| MCR | Magnetic card reader
Input voltage:DC12V
Storage capacity: 5600 cards
Dimension:138*56*32mm (L*W*H)
The product can be widely used as exit switch for bank VIP room.With the authorized card controlled by Magnetic card reader access controller, only some people have the right to enter..Online working or offline working is available.
|
| GC01 | Glass clamp(20cm)
Connect glass door panel and hanger
2pcs for 1 door leaf |
| GC02 | Glass clamp(1m)
Connect glass and hangers for frameless glass door
One pc for one glass door leaf |
| FG01 | Framed door guider(rubber or brush type optional)
10-40mm |
| FG02 | Framed door guider(rubber or brush type optional)
30-60mm |
| FG03 | Frameless glass door guider
Max. 15mm |
Factory:
| VEZE Competitive Advantages |
| 1. | We are direct manufacturer & we have professional self design team, which is capable of satisfying customers' most demanding needs |
| 2. | Our products have World Class Quality Testing. We have certificates of CE, UL, ROHS, TUV, CCC, ISO9001. |
| 3. | We use high quality carton box,damp-proof & breakage-proof bubble wrap, as well as wooden case packing to keep the goods intact even in long-distance sea transportation. |
| 4. | Our special INSPECTION & QC department maintains a strict level of quality control. It ensures that all products are in compliance with specification. All goods and raw materials bought into the company go through strict inspection to ensure they are of good quality and correct. |
| 5. | We have large production capability and sufficient safety stock to ensure quick lead-time. |
| 6. | We are constantly innovating to launch new products every year. |
| 7. | We provide 24-month warranty for all of our products. |
Address:
Wanyang Industrial Park, Hemudu Town, Yuyao, Ningbo, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Construction & Decoration, Consumer Electronics, Electrical & Electronics, Furniture, Industrial Equipment & Components, Instruments & Meters, Security & Protection, Service, Tools & Hardware
Management System Certification:
ISO 9001, ISO 14001, ANSI/ESD
Company Introduction:
Ningbo VEZE Automatic Door Co., Ltd. Was established in September 2005 and is a professional enterprise specialized in researching, designing, manufacturing and selling automatic door systems, automatic sliding doors, automatic swing doors, hospital hermetic doors, automatic curved doors, automatic telescopic doors, automatic revolving doors and high quality automatic door accessories: Brushless DC motors, infrared sensors, controllers, access control system, etc.
Safety Certification
Our products have certificates of CE, RoHS, TUV, CCC to meet strict requirements of different countries. We also have the certificate of ISO9001(Quality Management System)
R&D Team and Manufacturing
VEZE has established special R&D department, Tooling department, Testing department, Assembling department, and Packing department. Meantime, in order to guarantee the quality of product, we purchase the imported high-quality machine from USA & Germany. The PCB of the controller are printed precisely by the SMT machine, the motor are coiled by the automatic coil winding machine. From the testing procedure, all the types of controllers and electronic parts will stay in power for more than 36 hours to check that all electronic devices are working well, each motor will go through severe testing before selling, hardware will be checked under the strict QC system. So that our enterprise could supply products with high-class quality and competitive price.
Sales & Services
VEZE Automatic doors Co., Ltd takes Quality, Efficiency and Service as our motto. So we provide 24 months warranty. During the warranty period, we can replace the parts of problem with new parts for free.
VEZE have the most dedicated international service team. If you have any question or meet any problem, please feel free to contact us at any time, we′ll reply you and help to solve the problem at the soonest.
OEM&ODM Service
We have a professional design team, which can rebrand the customer′s logo and company name as per customer′s wishes.
VEZE Automatic Door Co., Ltd would develop more innovative and market-oriented products in the future.
Competitive Advantages:
1. We are professional manufacturer in automatic door field.
2. We have the certificates of CE, RoHS, TUV, CCC, ISO9001.
3. We provide 24 months warranty.
4. We use wooden carton packing to ensure security in transit.
5. We could control our products quality by our quality control dept.
6. We have a large storage to ensure supplying in time.
){kind=link}