Basic Info.
Function Type
Thermal Imaging System
Detection Type
Heat Detectors
Output Signal Type
Digital Type
Production Process
SemiConductor Integrated
Transport Package
Wooden Carton/Case
Origin
Ningbo Zhejiang, China
Product Description
Safety Instruction
Related part should be operated under low voltage condition. All installation process and maintaince be carried out by the supplier.
Name of Related Parts
▪JST connection( Red:24V power cable; Yellow: Relay )
▪COM / NO
▪The indicator will shin for few seconds when starting. When object is detected by sensor, indicator lights up.
▪Sensitivity potentiometer
▪Fluctuation up and down, rotation left and right.
Installation
1.Please do the installation in the proper position, installation height within 3.5m. Please arrange hole (Φ3.2mm) on the installation module. And hole (Φ12m) for insetting guide line.
2.Please connect the signal cable with the terminal of automatic door.
Brown and Yellow cable: AC/DC 12-24V
Green and White cable: Signal output COM/NO
3.Take the outer cover off, and fix the screws.
4.Finish the cable connection and get on power.
5.Please set the detection range and disjunctor accordingly.
6.Cover with the lid.
Picture of Automatic Door Detecting Sensors
Adjustment ( Get on Power )
1.Detection range
Note: Please stand out of the detection range around 5s to ensure the sensor has enough time to finish the self-adjustment.
2.Sensitivity adjustment
Detection range
MIN: 0.5*0.4M
MAX: 4*2M
Select different detection range by adjusting sensitivity knob
3.Adjustment of detection
( Adjust Direction of front and back / Left and Right flexibly )
Adjusting angle of plain aerial to get different detection distance range 30=15×2range
NOTE:
Initial setting is 45 degree by factory.
All the parameters above are only for reference, detection height is 2.2M.
Detection range will be different because of the making material of door and groud, please adjust the sensitivity by the knob metioned above.
When it is adjusted to 60 degree, the detection range is the widest, door will keep on closed and open all the time.
Special Note
▪Position should be fixed tightly to avoid virbrating.
▪Do not place into board or other material.
▪Moving object should be avoided.
▪Fluorescent should be avoided.
▪Do not touch directly, ESD protection is necessary.
Failure Cause
| Symptom | Cause | Method |
| Door&indicator lose failure | Did not get power | Check cable connection&power supply |
| Door keep on closed and open | Sensor detected the movement of autodoor, vibration of movement | 1.Adjust angle
2.Check the position
3.Adjust sensitivity |
| Door do not close Red indicator lose failure | 1.Switch of autodoor controller lose failure
2.Incorrect position
3.Incorrect output sensor | Check the switch of autodoor controller &setting of output |
| Door keeps on moving when it rains | Sensor detected the actins of rain | Adopt waterproof accessories |
Parameters
Technology: Microwaveµwave disposer
Transmitting power:<20dBm EIRP
Installation height: 4M(MAX)
Power:<2W(VA)
Maximum voltage: 42V AC-60V DC
Maximum switch power: 30W(DC)/60VA(AC)
Guide line:2.5M
Protection class: IP54
Color: Black/silvery
Anti-interference performance: R&tte 1995/5/EC, EMC 89/366/EEC
Power Voltage: 12V TO 30V AC+/-10%(50Hz to 60Hz): 12V TO 36V DC
Size: 120mm(W)×80mm(H)×50mm(D)
Frequency: 24,125GHz
Launch frequency density:<5mW/cm²
Installation angle: 0-90 degree(lengthways)-30 to+30(lateral)
Min detection speed: 5cm/s
Detection range: 8m*4m(installation height 2.2M)
Maximum current:1A
Retention time: 0.5s
Working temperature: -20ºC to +55ºC
Sheating material: ABS plastic
The Details on Manufacturing, Sales & ServicesTo ensure a high level of sound insulation, VEZE Research & Development team, which makes project-specific calculations and develops new products, put forward the idea of inserting a special middle layer that reaches from panel to frame and acoustically seals off the room within. Special building structures are evaluated in VEZE's own CE certified acoustic laboratory.
*R&D Team and Manufacturing:
VEZE has established special R&D department, Tooling department, Testing department, Assembling department, and Packing department. Meantime, in order to guarantee the quality of product, we purchase the imported high-quality machine from USA & Germany. The PCB of the controller are printed precisely by the SMT machine, the motor are coiled by the automatic coil winding machine. From the testing procedure, all the types of controllers and electronic parts will stay in power for more than 36 hours to check whether all electronic devices work well, each motor needs to pass the severe testing before selling, hardware will be checked under the strict QC system. So that our enterprise could supply products with good quality and competitive price.
*Sales & Services:
VEZE Automatic Door Co., Ltd takes Quality, Efficiency and Service as the motto. So we provide 24 months warranty. During the warranty period, we can replace the parts of problem with new ones for free.
VEZE have the most dedicated international service team. If you have any question or meet any problem, please feel free to contact us at any time, we'll reply you and help to solve the problem at the soonest.
*OEM&ODM Service:
We have professional design team, which can rebrand the customer's logo and company name as per customer's wishes.
VEZE will never stop the pursuit of innovation with style. VEZE Automatic Door Co., Ltd would develop more innovative and market-oriented products in the future.
Accessory List & Optional PartsOptional accessories:| Details of Optional accessories |
| Model No. | Specification |
| MS01 | Microwave sensor(10GHZ/24GHZ)
Power: AC/DC 12~36V
Radio frequency:10.525GHZ/24.125GHZ
Protection level: IP54
Size:131×61×46mm(L×W×H)
Max installation height: 4M
Detection range and sensibility can be adjusted. |
| MS02 | Microwave sensor(10GHZ/24GHZ)
Power: AC/DC 12~36V
Radio frequency: 10.525GHZ/24.125GHZ
Protection level: IP54
Size:110×64×42mm(L×W×H)
Max installation height: 4M
Detection range and sensibility can be adjusted. |
| MS03 | Microwave Sensor(24GHZ) with German Innosent Chip
Power: AC/DC 12~36V
Radio frequency: 24.125GHZ
Protection level: IP54
Size:121×80×51mm(L×W×H)
Max installation height: 4M
Detection range and sensibility can be adjusted. |
| IS01 | Infrared sensor
Power: AC/DC 12~36V
Sensing distance:0.2m-2m
Protection level: IP54
Size:221×74×35mm(L×W×H)
Max installation height: 3meters
Detection range and sensibility can be adjusted.
The product can be used in the occasion where the building environment is narrow and close to street and the accuracy detection ability is demanded .Detection sensing distance adjustable, with high anti-interference , easy operation and reliable |
| IS02 | Combined microwave&infrared sensor
Power:AC/DC 12~36V
Transmitting frequency:24.125GHZ
Protection level:IP54
Size:262×55×44mm(L×W×H)
Max installation height: 3meters
Combined radar activation and Infrared safety sensor is used for automatic sliding door, folding door and curve door. Radar technology is for door activation. Infrared technology is for door safety entrance. Unique anti-clip function design, no need extra safety beam sensors.
Have function of background self-learn. Can learn background automatically when power on. Suit all kinds of occasions.Always self-correcting once be influenced by quake, distortion, move, dark and sunshine. Ensure the sensor can work durable.
Microwave technology adopts the Germany Microwave sensor module, not influenced by temperature and humidity with reliable working performance. |
| PT01 | Safety beam(photocell)
Power:AC/DC12~36V
Max transmission distance: 10m
Type: single beam(one pair eyes)/ double beam(2 pairs eyes)
Receiver dimension:123*50*32mm
Electric eyes:19(length)*13(diameter)mm |
| FS01 | Foot sensor switch
Power:AC/DC12~36V
Recommended installation height: 0.3 meters from the ground
Active infrared ray of modulation-demodulation controlled by microcomputer. Widely used in the operating room of hospital and laboratory to prevent hand pollution. |
| FC01 | Five-range programmed function switch
Power: 12~36V
Function status: full open, half open, exit only, lock, automatic
Size:113×63×20mm(L×W×H)
function switch against passwords, safe and reliable. With memory function in case of power failure. Password can be reset.. |
| FC02 | Five-range function keypad
Power: 12~36V
Functions: full open, half open, exit only, lock, automatic
Size:86×86×10mm(L×W×H) |
| KP01 | Function key switch(five-range)
Power: AC/DC 18~36V
Functions: full open, half open, exit only, lock, automatic
Size:86×86×10mm(L×W×H) |
| KP02 | LED key switch(five-range)
Power: AC/DC18~36V
Size:92×92×46mm(L×W×H)
Functions: full open, half open, exit only, lock, automatic
This product is unidirectional command switch for automatic door accessory using. With special design with bottom panel, it is convenient for different installation occasions. |
| KP03 | Five-range LCD key switch
Power: AC/DC12~36V
Size:92×92×33 mm(L×W×H)
Functions: full open, half open, exit only, lock, automatic
This product is unidirectional command switch for automatic door. With TFT true color liquid display, special design with bottom panel, it is convenient for different installation occasions. |
| PB07 | Infrared hand sensor switch
Power: AC/DC12~36V
Size:92×92×33 mm(L×W×H)
Transmit distance: 1-20cm, can be set according to actual occasion. |
| FC04 | Learning code remote control device(4 channels)
Power: 24VDC
433 MHZ Learning code type
Transmission distance: 25M
Function status: full open, half open,lock, automatic |
| FC05 | Learning code remoter control device(4 channels)
Power: 24VDC
433 MHZ Learning code type
Transmission distance: 25M
Function status: full open, half open,lock, automatic |
| FP01 | Fingerprint access control device / time attendance machine
Power supply:12VDC
Fingerprint capacity:1000
Recorded capacity:100,000
Dimension:180*82*53(L×W×H)
Identification mode: Fingerprint / ID card / Password
Voice prompt: available |
| PB04 | No touch hand sensor switch
Power: DC 12V
Working type: infrared induction
Working distance: 5-15cm, can be set according to actual occasion.
Weight: 110g
Size: 86×86×35mm(L×W×H) |
| PB05 | Infrared touchless hand sensor switch
Power: AC/DC12~36V
Working type: infrared induction
Transmit distance: 1-15cm, can be set according to actual occasion.
Size:113×63×20mm(L×W×H)
Weight: 110g |
| PB06 | Wireless push button switch
Power: AC/DC12~36V
Hold open time:1-9S adjustable
Pushing panel:203(L)*41(W)*12.5(H)mm
Receiver:123(L)*50(W)*32(H)mm
Widely be used for auto door and door control equipment. With the wireless signal output,door can be open by the pushing the panel. Easy installation,specially designed for the occasions which have difficulty in wire embedding. |
| AK02 | Access keypad(plastic)
Power: 12VDC
User capacity: 500 users
Open method:Card, password, both.
1000 pcs card info can be stored
Dimension:117×117×21(mm)
Specific designed for office, housing, security system and building's access . It not only can work by reading card or password ,but also can control electric lock and auto-door. |
| AK03 | Access keypad
Power: 12VDC
Storage capacity: 1000 users
Open method:Card, password, card+password.
Dimension:115×75×21(mm) |
| AK04 | Access keypad
Power: 12VDC
Storage capacity: 1000 users
Open method:Card, password, card+password.
Dimension:110×75×25(mm) |
| FP02 | Finger printer(stainless)
Power: DC 12V
Memory capacity:120
Weight: 500g
Size: 115×70×35mm(L×W×H) |
| UPS | Automatic door backup lithium battery
Input voltage:220VAC, 50HZ
Output voltage:DC12V/5.2A, DC24V/2.6A
Size: 243×59×45mm(L×W×H)
When power off, it can make the door work 7 hours
or open and close 500 times. |
| PB03 | Wired push button switch(plastic)
Weight: 96g
Size: 200×50×12.5mm(L×W×H) |
| PB02 | Wired push button switch(stainless) with blue LED
Weight: 65g
Size: 84×84×35mm(L×W×H) |
| PB01 | Wired push button switch(stainless) with blue LED
Weight:50g
Size: 84×84×27mm(L×W×H) |
| LC01 | Metal manual lock
Lock manually, open with key. |
| LC02 | Electric lock
Power: DC 12V
Working current: 110mA
Installation hole:212(L)*35(W)
Deep into wall around 43 mm
Panel dimension:205×34×42mm(L×W×H) |
| LC03 | Electromagnetic lock
Power: DC 12V
Working current: 180mA
With the function of locking the access device, it uses with access control,and equip with bracket for installation. |
| LC04 | Electromagnetic lock
Power: DC 12V
Working current: 960mA
Load weight:180kgs
The product uses with access control device , it can be installed on glass doors ,wooden doors, iron gate or fireproof doors.
|
| DS01 | Auto door disable switch
Power:AC/DC12~36V
Panel size:160(L)*120(W)*15(H)mm
Stainless steel panel design,easy operation with key to choose different functions including: Emergency opening, Automatic and Full lock. Suitable for automatic door of disable-person washroom or washroom management of building. |
| MCR | Magnetic card reader
Input voltage:DC12V
Storage capacity: 5600 cards
Dimension:138*56*32mm (L*W*H)
The product can be widely used as exit switch for bank VIP room.With the authorized card controlled by Magnetic card reader access controller, only some people have the right to enter..Online working or offline working is available.
|
| GC01 | Glass clamp(20cm)
Connect glass door panel and hanger
2pcs for 1 door leaf |
| GC02 | Glass clamp(1m)
Connect glass and hangers for frameless glass door
One pc for one glass door leaf |
| FG01 | Framed door guider(rubber or brush type optional)
10-40mm |
| FG02 | Framed door guider(rubber or brush type optional)
30-60mm |
| FG03 | Frameless glass door guider
Max. 15mm |
Factory:
| VEZE Competitive Advantages |
| 1. | We are direct manufacturer & we have professional self design team, which is capable of satisfying customers' most demanding needs |
| 2. | Our products have World Class Quality Testing. We have certificates of CE, UL, ROHS, TUV, CCC, ISO9001. |
| 3. | We use high quality carton box,damp-proof & breakage-proof bubble wrap, as well as wooden case packing to keep the goods intact even in long-distance sea transportation. |
| 4. | Our special INSPECTION & QC department maintains a strict level of quality control. It ensures that all products are in compliance with specification. All goods and raw materials bought into the company go through strict inspection to ensure they are of good quality and correct. |
| 5. | We have large production capability and sufficient safety stock to ensure quick lead-time. |
| 6. | We are constantly innovating to launch new products every year. |
| 7. | We provide 24-month warranty for all of our products. |
Address:
Wanyang Industrial Park, Hemudu Town, Yuyao, Ningbo, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Construction & Decoration, Consumer Electronics, Electrical & Electronics, Furniture, Industrial Equipment & Components, Instruments & Meters, Security & Protection, Service, Tools & Hardware
Management System Certification:
ISO 9001, ISO 14001, ANSI/ESD
Company Introduction:
Ningbo VEZE Automatic Door Co., Ltd. Was established in September 2005 and is a professional enterprise specialized in researching, designing, manufacturing and selling automatic door systems, automatic sliding doors, automatic swing doors, hospital hermetic doors, automatic curved doors, automatic telescopic doors, automatic revolving doors and high quality automatic door accessories: Brushless DC motors, infrared sensors, controllers, access control system, etc.
Safety Certification
Our products have certificates of CE, RoHS, TUV, CCC to meet strict requirements of different countries. We also have the certificate of ISO9001(Quality Management System)
R&D Team and Manufacturing
VEZE has established special R&D department, Tooling department, Testing department, Assembling department, and Packing department. Meantime, in order to guarantee the quality of product, we purchase the imported high-quality machine from USA & Germany. The PCB of the controller are printed precisely by the SMT machine, the motor are coiled by the automatic coil winding machine. From the testing procedure, all the types of controllers and electronic parts will stay in power for more than 36 hours to check that all electronic devices are working well, each motor will go through severe testing before selling, hardware will be checked under the strict QC system. So that our enterprise could supply products with high-class quality and competitive price.
Sales & Services
VEZE Automatic doors Co., Ltd takes Quality, Efficiency and Service as our motto. So we provide 24 months warranty. During the warranty period, we can replace the parts of problem with new parts for free.
VEZE have the most dedicated international service team. If you have any question or meet any problem, please feel free to contact us at any time, we′ll reply you and help to solve the problem at the soonest.
OEM&ODM Service
We have a professional design team, which can rebrand the customer′s logo and company name as per customer′s wishes.
VEZE Automatic Door Co., Ltd would develop more innovative and market-oriented products in the future.
Competitive Advantages:
1. We are professional manufacturer in automatic door field.
2. We have the certificates of CE, RoHS, TUV, CCC, ISO9001.
3. We provide 24 months warranty.
4. We use wooden carton packing to ensure security in transit.
5. We could control our products quality by our quality control dept.
6. We have a large storage to ensure supplying in time.
){kind=link}